Y50X12-10ZK10-2XL2 | 10-гнездная розетка с квадратным фланцем и уплотнением 2XL2
Y50X12-10ZK10-2XL2 is a GJB standard square flange receptacle with 10 socket contacts and a size 12 shell. Featuring “X” series enhanced sealing and a 2XL2 backshell for high-reliability grids.
999999 в наличии
Делиться:
Категории товаров
Запросить сейчас
Y50X12-10ZK10-2XL2 Mechanical Stability of the Square Flange Chassis Mount
Он Y50X12-10ZK10-2XL2 is specifically designed for integration into ruggedized equipment chassis and control panels where mechanical stability is a primary requirement. The square flange (ZK10) architecture allows for secure four-point mounting, which evenly distributes mechanical stress across the panel surface. This ensures that the receptacle remains perfectly aligned even when subjected to intense vibration, thermal expansion, or the high mating torque of daily operations. The size 12 shell, machined from high-strength aluminum alloy, provides a compact yet robust housing for the internal 10-pole connection.
To further protect the internal electrical interface, the 2XL2 backshell serves as a high-performance cable exit point. It provides a straight-profile sealing solution that includes a specialized cable clamp for superior strain relief. This architecture ensures that any pulling or twisting forces applied to the external cable are absorbed by the backshell, preventing mechanical stress from reaching the delicate solder or crimp terminations inside the receptacle. This makes the Y50X12-10ZK10-2XL2 an essential component for mobile industrial machinery and tactical electronic enclosures.
Основные характеристики
Материал оболочки | Номинальное напряжение | Текущий рейтинг | Рабочая температура | Степень защиты от проникновения влаги и пыли | Циклы спаривания | Ключевая модуляция и поляризация | Соединение |
|---|---|---|---|---|---|---|---|
Алюминиевый сплав | ~1000 В переменного тока | ~40 А | от -55 °C до +150 °C | IP67 | 500 | N | Быстроразъемное штыковое соединение |
10-Socket Layout and Enhanced Safety Logic
The 12-10 insert arrangement of the Y50X12-10ZK10-2XL2 offers a high density of 10 independent socket (female) contacts. The ZK designation—placing sockets within a fixed receptacle—is the industry standard for electrical safety on panels that serve as power outputs or signal sources. Because the conductive sockets are recessed deep within the dielectric insulator, the risk of accidental short-circuits or electrical shock is significantly reduced when the device is in an unmated state. Each socket is meticulously finished with high-purity gold plating to ensure low contact resistance and long-term protection against atmospheric oxidation.
Signal integrity is maintained through the use of high-performance dielectric materials that offer exceptional insulation resistance and thermal stability. These materials are selected for their ability to resist carbon tracking and maintain geometric precision across a wide temperature range. For engineers designing multi-channel sensor networks or complex industrial control grids, this 10-pole interface provides a reliable gateway that prevents signal crosstalk and electrical leakage, ensuring consistent data fidelity in sophisticated electronic architectures.
"X" Series Environmental Hardening and Shielding
As an “X” series enhanced environmental connector, the Y50X12-10ZK10-2XL2 is built to thrive in moisture-heavy and particulate-rich field conditions. It is equipped with a comprehensive sealing system, including internal grommets and high-resilience gaskets that create a moisture-proof and dust-proof barrier. This ensures that the internal contact area remains protected against rain, salt spray, and industrial contaminants. The 2XL2 backshell provides a critical secondary seal at the rear of the receptacle, preventing humidity or fine dust from entering the equipment housing through the cable entry point.
Beyond environmental sealing, the metallic shell provides a natural Faraday cage for EMI/RFI shielding. When the receptacle is properly grounded to a conductive equipment panel and used with shielded cabling, the Y50X12-10ZK10-2XL2 effectively attenuates external electromagnetic noise. This is essential for protecting delicate signals in “noisy” industrial environments near high-voltage motors or radio transmitters. The shell finish—typically nickel or olive drab—adds a robust layer of corrosion resistance, preserving the functional life of the bayonet lugs and the overall structural integrity of the connector.
Strategic Applications in Aerospace and Automation
The versatility and ruggedness of the Y50X12-10ZK10-2XL2 make it a staple component in several high-stakes industries, including aerospace, defense, and industrial automation. In the aerospace sector, its lightweight square-flange design is highly valued for avionics control boxes and ground support equipment where space is at a premium. The 10-socket arrangement allows for complex signal routing while the bayonet lock ensures mission-critical data remains uninterrupted throughout intense flight vibration profiles.
In industrial automation and offshore energy grids, this receptacle is frequently used as the primary interface for control panels and mobile monitoring devices. The 2XL2 backshell ensures that the rear cable connections survive the mechanical stress associated with field assembly and long-term maintenance. By providing a standardized, GJB-compliant, and cost-effective interconnect gateway, the Y50X12-10ZK10-2XL2 delivers the reliability required for the most demanding electronic environments worldwide.
Часто задаваемые вопросы
What does the ZK10-2XL2 designation signify in this receptacle?
What does the ZK10-2XL2 designation signify in this receptacle?
ZK10 refers to a square flange receptacle equipped with socket (female) contacts, while 2XL2 indicates a straight environmental backshell that provides enhanced sealing and cable strain relief.
Why are socket contacts (ZK) preferred for panel-mounted receptacles?
Why are socket contacts (ZK) preferred for panel-mounted receptacles?
Socket contacts are a standard safety feature for power-output or signal-source panels. By housing the conductive elements within the insulator, they prevent accidental contact and short circuits when unmated.
Can I mate this receptacle with any Y50 series size 12-10 plug?
Can I mate this receptacle with any Y50 series size 12-10 plug?
Yes, the mating interface follows strict GJB standards for the size 12-10 arrangement, ensuring it is fully compatible with any matching Y50 series plug, regardless of the plug’s backshell type.
How does the "X" series sealing improve performance?
How does the "X" series sealing improve performance?
The “X” designation indicates enhanced environmental protection, featuring higher-grade seals and gaskets that are more resistant to moisture, salt spray, and industrial fluids.
Is the 2XL2 backshell suitable for shielded cables?
Is the 2XL2 backshell suitable for shielded cables?
Absolutely. The 2XL2 backshell is designed to provide a secure mechanical clamp and grounding point for shielded cables, which is essential for maintaining EMI/RFI protection.
Сертификация
- 测试文件后期要删除换成你自己的
