Y50DXD4-04ZJ10-2L2 | Миниатюрная квадратная фланцевая 4-контактная розетка
Y50DXD4-04TK2L2 is a miniature environmental circular connector with 4 pin contacts. Designed for high-density electronic grids, offering bayonet locking and GJB standard reliability.
999999 в наличии
Делиться:
Категории товаров
Запросить сейчас
Architectural Features of the Y50DXD4-04ZJ10-2L2
Он Y50DXD4-04ZJ10-2L2 is a specialized receptacle that bridges the gap between rugged military performance and the need for miniaturization in modern electronics. The D4 shell designation indicates a compact diameter, significantly reducing the panel space required compared to standard circular connectors. This miniature profile is combined with a ZJ square flange mounting system, which provides four reinforced attachment points. For engineers, this ensures the connector remains perfectly centered and immobile even when subjected to intense mechanical stress or the constant mating cycles of portable equipment.
The bayonet coupling pins on the shell exterior are precision-machined to ensure a smooth, low-friction interface with mating plugs. This rapid-locking system provides a tactile and audible click, allowing operators to verify a secure connection in seconds. By utilizing this D4 architecture, the Y50DXD4-04ZJ10-2L2 allows for a higher density of connection points on a single chassis, which is a critical requirement for advanced avionics, tactical gear, and sophisticated industrial control units.
Основные характеристики
Материал оболочки | Номинальное напряжение | Текущий рейтинг | Рабочая температура | Степень защиты от проникновения влаги и пыли | Циклы спаривания | Ключевая модуляция и поляризация | Соединение |
|---|---|---|---|---|---|---|---|
Алюминиевый сплав | ~1000 В переменного тока | ~40 А | от -55 °C до +150 °C | IP67 | 500 | N | Быстроразъемное штыковое соединение |
Electrical Performance and 4-Pole Configuration
The 04 insert arrangement provides a clean, four-pole electrical path optimized for power distribution or differential signal pairs. The ZJ10 configuration features pin (male) contacts, which are typically used on the device-side to serve as the power-output or signal-source interface. Each pin is manufactured from a high-conductivity copper alloy and finished with gold plating. This plating not only prevents oxidation but also ensures a low-resistance contact interface that remains stable across a wide range of current loads and environmental temperatures.
Internal insulation is managed by a high-grade dielectric material that prevents voltage breakdown between the four closely spaced pins. The dielectric strength and insulation resistance are tested to meet rigorous GJB standards, ensuring that data integrity is maintained and that there is no risk of short-circuiting in humid or high-altitude conditions. This makes the Y50DXD4-04ZJ10-2L2 an excellent choice for 24V DC power input, sensor feedback loops, or serial communication protocols where reliability is paramount.
Environmental Resilience and Sealing Technology
Environmental endurance is a hallmark of the DX series. The Y50DXD4-04ZJ10-2L2 is designed with an integrated sealing system that protects the internal electrical contacts from moisture, dust, and corrosive vapors. When mounted with a flange gasket, the receptacle creates a hermetic-like seal against the equipment panel, preventing contaminants from entering the sensitive internal electronics of the device. This level of protection is essential for hardware deployed in tropical climates, maritime environments, or industrial zones with high particulate levels.
The aluminum alloy shell is treated with a specialized military-grade coating, such as olive drab chromate or electroless nickel, which provides an effective shield against salt spray and atmospheric corrosion. This protective layer ensures that the bayonet lugs and mounting surfaces remain structurally sound over the long term. Additionally, the 2L2 backshell provides essential strain relief for the rear wire terminations, protecting the delicate solder or crimp points from mechanical fatigue caused by cable movement or vibration.
Diverse Industrial and Tactical Applications
The versatility of the Y50DXD4-04ZJ10-2L2 makes it a staple in various high-reliability sectors. In the field of unmanned aerial vehicles (UAVs) and robotics, its lightweight and compact D4 shell allow for high-performance connectivity without adding significant weight to the platform. The four-pin layout is perfectly suited for motor power, GPS signal lines, or camera control interfaces, providing a secure connection that survives the shocks of takeoff, landing, and rapid maneuvering.
In the industrial sector, this receptacle is frequently used in portable testing instruments and medical diagnostic devices where panel space is at a premium but reliability cannot be compromised. The square flange mounting ensures that the connector can withstand the rigors of daily field use, while the bayonet system allows for fast and error-free operation. By offering a combination of GJB-compliant engineering, space-saving design, and comprehensive environmental protection, the Y50DXD4-04ZJ10-2L2 delivers a proven solution for the most demanding interconnect challenges globally.
Часто задаваемые вопросы
What makes the D4 shell different from other Y50 sizes?
What makes the D4 shell different from other Y50 sizes?
The D4 shell is a miniaturized version of the standard Y50 series, designed specifically for high-density applications where saving space and reducing weight are primary goals.
Does the Y50DXD4-04ZJ10-2L2 include mounting hardware?
Does the Y50DXD4-04ZJ10-2L2 include mounting hardware?
Most standard kits include the receptacle and the 2L2 backshell, but it is recommended to confirm with your supplier if the flange gasket and mounting screws are included.
Is the ZJ configuration available with female contacts?
Is the ZJ configuration available with female contacts?
Yes, the ZK designation would indicate a square flange receptacle with socket (female) contacts, whereas ZJ specifically indicates pin (male) contacts.
How does the 2L2 backshell improve the connection?
How does the 2L2 backshell improve the connection?
The 2L2 backshell provides a secure clamp for the cable, offering strain relief that prevents physical stress from damaging the internal wire terminations and enhances the overall environmental seal.
Can this connector be used for digital data transmission?
Can this connector be used for digital data transmission?
Absolutely. The gold-plated contacts and stable dielectric make the 4-pin arrangement suitable for various digital signals, including RS-232, RS-485, and low-speed sensor data.
Сертификация
- 测试文件后期要删除换成你自己的
